MEDIA ReleaSE
24 May 2012
Company fined for failing to prevent fall from height
Roofing company Metalcraft Industries Ltd has been fined $43,000 and ordered to pay reparations of $10,000 after an
employee was seriously injured after falling more than three metres from a roof.
The Auckland District Court heard that on 9 June 2011 three employees of Metalcraft Industries Ltd were working on a
single storey Keith Hay residential home in Glen Innes, Auckland.
“While reaching down to secure a safe hold on the damp ridge of the roof, one of the employees slipped and fell more
than three metres to the ground, fracturing his lower back, several ribs and damaging shoulder tendons and ligaments,”
says the Department of Labour’s Northern General Manager John Howard.
The Department of Labour’s investigation into the incident found that it could have been prevented if Metalcraft
Industries Ltd had planned a safe approach to working at height and put in place appropriate roof edge protection.
“The precautions taken by the employer fell short of what is required,” Mr Howard says.
“Preventing falls from height is a priority for the Department of Labour. We expect everyone with staff or contractors
working at height to actively manage this significant hazard,” he says.
The Department’s new Best Practice Guidelines for Working at Height in New Zealand provide practical guidance about how
to actively manage working at height to prevent harm.
To complement the guidelines the Department has also produced a series of six factsheets. These focus on:
· how to plan a safe approach to working at height
· how to select the right equipment for the job
· short duration work at height
· edge protection
· temporary work platforms
· total restraint system.
“All employers, contractors and employees who are required to work at height should read the guidelines and factsheets
so they take appropriate precautions to ensure the safety of those working at height. Doing nothing is not an option,”
Mr Howard says.
ENDS