It's Here! The Sydney Motor Show Star Arrives
Click to enlarge
ITS HERE! THE SYDNEY MOTOR SHOW STAR ARRIVES
Just hours after its world debut in Paris, visitors to Sydney’s Darling Harbour have had a sneak preview of the star of
the 2008 Australian International Motor Show with the Ferrari California pausing for a few quick pictures before
entering the exhibition halls ready for its debut on 9 October 2008.
“We were after a few pictures of our new supercar for local use with a Sydney skyline behind it and under and Australian
sky,” explained Kevin Wall, General Manager for Ferrari at the Australian and New Zealand importer, EAI. “So a few lucky
people have had a truly exclusive preview of what will, without doubt, be the star of the Australian International Motor
Show, which, after the Paris Show, will be the next place anyone in the world will see the Ferrari California in
public.”
With the Ferrari California now in the public arena, albeit only in Paris this week and Sydney next week, Ferrari have
released details of the new super car that have been, hitherto, a closely guarded secret.
Styling
The California's sleek aerodynamic styling is, like the rest of the current Ferrari models, the result of our
longstanding collaboration with Pininfarina and offers a host of signature Ferrari styling cues. Viewed from the side,
the aerodynamic sweep of the bonnet beautifully contrasts with the compact tail volume and the pulled-back cabin. The
front continues some of the themes hinted at on the flanks, harmoniously alternating concave and convex volumes.
Seen head-on, the car clearly takes it much of its inspiration from the prestigious Prancing Horse car from which it
takes its name: the grille and slender air intake at the centre of the bonnet most notably harking back to the 250 GT
California. At the rear, the sides and the muscular tail section are both familiar too. As at the front, the single
round LED taillights are inset directly along the edge of the boot The California's vertically stacked twin tailpipes
are an original flourish as is the boot which sweeps right down to the bumpers to improve functionality.
Of course, the interior also reflects the same level of design sophistication, exuding a sense of refined luxury,
comfort and bespoke quality. Situated between the front seats, the new aluminium-trimmed centre console is another
distinctive touch that goes beyond the merely aesthetic, beautifully combining functionality and design.
Aerodynamics
The Ferrari California's aerodynamics were, of course, developed in tandem with its styling. This allowed Ferrari to
keep the Cx (drag coefficient) right down with respect to the downforce required for optimal vehicle dynamics. In the
coupé configuration, the California has a Cx value of 0.32. A desire to achieve perfect balance between vertical load
and drag influenced the shape of the rear diffuser and the spoiler incorporated into the front bumper.
Drag has been cut to 10% lower than on the other Ferrari models which not only makes the California a more
aerodynamically efficient car but also reduces fuel consumption. Last but not least, the air intake on the bonnet
ensures highly efficient cooling of the engine compartment.
The new 8-cylinder engine
This is the first V8 in the history of Ferrari road-cars to be mid-front mounted. Built entirely from aluminium, it
retains the typical Ferrari architecture with a 90° angle between the two cylinder banks and a 180° angle between the
cranks.
The engine has a total displacement of 4,300 cc and a maximum power output of 460 hp/338 kW at 7,750 rpm. With a
specific power of 107 hp/litre, its maximum torque is 485 Nm (49 kgm) at 5,000 rpm, 75% of which is available at just
2,250 rpm. The Ferrari California takes less than 4 seconds to accelerate from 0 to 100 km/h and delivers a blistering
310 km/h top speed.
The new V8 features direct fuel injection and variable timing (on both intake and exhaust) to guarantee superb
performance, exceptional handling and fuel consumption and emissions that easily comply with the toughest Euro 5 and
Lev2 standards. Thanks in part to these solutions, the Ferrari California consumes just 13.1 litres/100 km (ECE
combined) and has carbon emissions of 305.6 g\km (ECE combined).
The California's engine sound was also carefully developed as this is one of the great Ferrari signatures and really
does contribute to enhancing driving pleasure. Particular attention was lavished on sound perception in the cabin both
with the top up and down to ensure that trademark thrill without compromising on occupant acoustic comfort.
Gearbox and transmission
The Ferrari California sports a new dual clutch gearbox (7-speed + reverse) with the now traditional steering
wheel-mounted F1-style paddles. This is an innovative system that guarantees a superb combination of performance and
ride comfort. With the dual clutch, one clutch is used for even-numbered gears and the other for odd-numbered ones, and
allows the pre-selection of the next gear required. The gears are changed by overlapping the opening and closing stage
of both clutches, resulting in gearshifting times that are close to zero and with no "torque interrupt".
The result is not only enhanced performance but truly thrilling driving pleasure. The traditional transaxle layout
(engine to the front and gearbox to the rear) also contributes to the California's perfect weight distribution (47%
front - 53% rear) and to reducing vibration to the bodyshell. In manual mode, the new gearbox guarantees great sporty
driving pleasure while extra comfort is assured in automatic.
Chassis and suspension
The Ferrari California's chassis and bodyshell are both made entirely from aluminium. Thanks to the use of different
aluminium technologies (extrusions and shell casts), the car's exceptional versatility, onboard comfort and driveability
has not added to chassis weight or to the dimensions of the structural sections - something that simply would not be the
case had traditional steel architecture and technologies been used. Furthermore, static rigidity (torsional and
flexional) has been improved with respect to average figures for a Spider to ensure exceptional handling in any kind of
road conditions and to guarantee GT-standard comfort both with the top up and down.
The Ferrari California retains the traditional double wishbone suspension to the front while a new multilink system has
been specially developed for the rear. The multilink system improves longitudinal flexibility of the suspension, keeping
transverse rigidity values high. What this means in practice is that the car beautifully absorbs any unevenness, and
noise and vibration are efficiently damped for exceptional ride comfort well on a par with the car's nimble handling.
The SCM Magnetorheological Suspension Control System, debuted on the Ferrari 599 GTB Fiorano, is also available on
request.
Retractable Hard Top
Of course the Ferrari California's signature feature has to be its retractable hard top (RHT). It is made from aluminium
panels and has a cast aluminium weight-bearing structure which has reduced its overall weight and the moving masses
involved. The entire opening/closing cycle is completed in just 14 seconds and thanks to the original stowage system,
the California's boot space remains extremely generous regardless of whether it is up or down.
The GT Manettino and F1-Trac
The manettino has now become one of the classic features of our entire range as has its position on the steering wheel
which is clearly derived from our Formula 1 experience. The manettino integrates the gearbox, stability and traction
control systems (CST and F1-Trac) and the SCM suspension system.
The settings are as follows:
COMFORT: maximum safety in all conditions, particularly ideal for low grip situations (wet or slippery road surface).
Best everyday driving setting.
SPORT: maximum performance and stability in perfect grip situations. Recommended for sporty, high performance driving.
CST-OFF: this setting gives the driver complete freedom and control of the car. There is no electronic intervention
whatsoever apart from ABS.
The Ferrari California also sports the F1-Trac traction control system which can very accurately read grip, assuring the
very best can be made of the car's potential at any time.
The F1-Trac system guarantees:
• Maximum grip coming out of corners
• Stability in all driving conditions
• Superb driveability and handling in extreme situations
• Consistent performance
• Exceptional ride comfort.
In fact, the F1-Trac offers a 20% improvement in acceleration coming out of corners with respect to a traditional
traction and control systems.
Safety equipment
The Ferrari California boasts an automatic roll-bar to ensure that its occupants are protected should the car overturn.
The system is installed behind the backrests of the rear seats and is hidden by the trim of the same. Ejection time is
under 190ms. The onboard safety equipment is completed by front retractable airbags (driver and passenger sides), side
retractable air bags in door panels, bi-xenon headlights and LED rear lights. New generation adaptive headlights, known
as AFS (Advanced Frontlighting System), are also available on request, and offer improved visibility on the road. The
headlamp beam angles are automatically adjusted in line with steering, angle, speed and lateral acceleration, offering a
wider area of illumination when cornering.
Interior and standard equipment
Particular attention has been lavished on the design and in-car comfort standard of the California's cabin. The new
Ferrari is available in a choice of two configurations:
1. Two-seater plus rear bench equipped to take two roller suitcases or two golf bags.
2. 2+ configuration that sees the rear bench sporting two seats, Isofix attachment points, and two seat belts.
In both version, the rear backrest folds down to allow the stowage of longer items such as golf bags or skis The boot
capacity is also impressively generous: 340 litres with the top up and 240 with the top down.
A new electrically adjustable, magnesium-framed seat was also designed for the California. Another new feature is the
instrument panel with analogue instruments (tachometer and rev counter) and four-screen TFT Multidisplay The Ferrari
California also boasts a new infotainment system with 6.5'' touchscreen, Sat Nav, USB connection, Bluetooth, hard disc,
voice commands and IPOD connector.
Carrozzeria Scaglietti Personalisation Programme
The Carrozzeria Scaglietti Programme allows all Ferrari clients to personalise their car to suit their own tastes and
requirements. There are four main areas covered by the Programme: Racing and Track, Exteriors and Colours, Interior and
Materials, Equipment and Travel. The Ferrari California comes with diamond-finish 19" 5-spoke aluminium alloy wheels as
standard.
However, a further set of diamond-finish 20" forged 5-spoke alloy wheel that are 11 kg lighter than those offered as
standard can also be ordered. The aforementioned diamond-finish gives the wheels an extra-high polish look.
The California is available in a choice of 16 different pastel and metallic colours. However clients also have the
option of ordering the new Azzurro California shade created especially for the car's launch.
In addition to the usual range of 12 leather colours available to choose from for the interior trim too, we've just
added two new colours: Cioccolato and Iroko. A new racing seat with all-carbon-fibre frame and electrically adjustable
backrest is also now available.
In addition to the already impressive list of features offered as standard with the new California, owners can also
choose to have a rear parking camera fitted or order the luggage set designed specifically to make the very most of the
rear bench space, an option available in addition to the traditional three-piece leather set coloured to match the
interior trim, of course.
Samples of the various materials and virtual configuration tools will also be available to clients at every Ferrari
showroom to help them make their choices too. They may also request out of- range colours and content to really ensure
their Ferrari California is absolutely unique.
Pricing and specifications for the Australian and New Zealand market Ferrari California will be announced when
deliveries start in mid-2009.
FERRARI CALIFORNIA TECHNICAL SPECIFICATIONS
DIMENSIONS AND WEIGHTS
Length 4563 mm
Width 1902 mm
Height 1308 mm
Wheelbase 2670 mm
Front track 1630 mm
Rear track 1605 mm
Dry weight 1630 kg
Kerb weight 1735 kg
Weight distribution 47% Front - 53% Rear
Fuel tank capacity 78 l
Boot capacity 340 l
240 (with roof retracted)
TYRES
Front 245/40 ZR19"
Rear 285/40 ZR19"
Front (optional) 245/35 ZR20"
Rear (optional) 285/35 ZR20""
CARBON-CERAMIC BRAKES
Front 390 x 34 mm
Rear 360 x 32 mm
ELECTRONIC CONTROL SYSTEMS
CST with F1-TRAC Stability and Traction Control System
TPTMS Tyre Pressure and Temperature
Monitoring System
ENGINE
90° V8 Direct Injection
Bore and stroke 94 x 77.37 cc
Overall displacement 4297 cc
Compression ratio 12.2:1
Maximum power output 338 kW (460 CV) at 7750 rpm
Maximum torque 485 Nm (49 kgm) at 5000 rpm
PERFORMANCE
Maximum speed 310 km/h
0-100 km/h under 4.0 sec
0-400 m 12.2 sec
0-1.000 m 22.1 sec
GEARBOX
F1, dual-clutch, 7-speed plus reverse
Manual 6-speed + REV
SUSPENSION
Front: Double wishbone
Rear: Multilink
FUEL CONSUMPTION
ECE Combined* 13.1 l/100 km
CO2 EMISSIONS
ECE Combined* 305.6 g/km
*Europe version
ENDS
Editor’s Note: The correct definition of the engine position in the Ferrari California is mid-front because while the engine is ahead
of passenger compartment, the engine sits behind the front axle line and the entire drivetrain is between the axle
lines, making it as much mid-engined as the F430, which is defined as a rear-mid engined car.