Commission proposes cutting red tape in EU defence industry
The European Commission wants to tackle obstacles to cross frontier trade in defence related products within the EU,
thereby facilitating cross-border procurement of Member States' armed forces and industrial cooperation in Europe.
So far, the circulation of defence related products within the internal market is constrained by a web of heterogeneous
and disproportionate national licensing procedures. By streamlining those procedures, today's proposal will contribute
to make European defence industries more competitive and improve conditions for Small and Medium Sized Enterprises'
(SMEs) participation in armament development and production.
In addition, it should enable Member States to meet military needs at lower cost and enhance security of supply for
public procurement and industrial cooperation. To preserve the overall prevailing level of security interests'
protection, the facilitation of intra-EU transfers has been complemented by mutual confidence-building measures, notably
guarantees for the protection of national security in case of re-exportation to third countries.
Issue
Licensing rules, which have to be complied with by defence companies wishing to exchange even components between
subsidiaries within the EU significantly differ from one Member State to another in terms of scope, competent
authorities, procedures and timing. Furthermore, they typically do not establish any distinction between transfers to
another Member State and exports to third countries (i.e. an intra-community transfer of a defence related product
commonly follows the same procedural requirements as the same export to any third country).
This patchwork of licensing schemes not only imposes a significant administrative burden on companies, but also induces
long lead times - up to several months. The corresponding administrative burden on companies and administrations and the
indirect impact[1] have been estimated respectively at € 433 million/year and € 2,73 billion / year.
This burden is clearly out of proportion with actual control needs. Indeed, license applications for intra-Community
transfers are hardly ever rejected: whilst around 11500 licences for such transfers are annually issued, not a single
request has been formally denied since 2003.
By improving conditions for commercial exchanges between European defence industries, the proposal will pave the way for
increasing industrial cooperation and optimising supply chains, with a prime benefit for large industrial groups with
subsidiaries in several Member States. It will finally make a crucial contribution to a more competitive European
industrial and technological defence industrial base.
Proposed measures
Concretely, the EU framework will induce Member States to replace as far as possible their existing individual licences
by general licences for those intra-community transfers where the risks of undesired re-exportation to third countries
is under control, namely:
purchases by armed forces of others EU Member States,
transfers to certified companies of components in the context of industrial cooperation,
transfers of products necessary for cooperative programmes between participating Member States.
Global licences, regrouping several transfers to several recipients by one supplier, should in principle cover most of
the remaining of intra-community transfers, individual licensing thus becoming the exception. Member States will remain
free to determine the products eligible for the different types of licences, to set terms and conditions of such
licences and to continue their cooperation in intergovernmental bodies such as the LoI.
The shift from less ex-ante to more ex-post control will require additional guarantees designed to increase confidence
between Member States in their mutual ability to deal with export to third countries following the initial
intra-community transfer. Member States will have to establish procedures on the basis of common criteria to certify
recipient companies' capacities to properly handle the risks associated with the commerce in defence-related products.
Hence, any SME, wherever located in Europe, will be able to benefit from the simplified framework when transferring
under a general licence its products to a certified system integrator located in another Member State.
In addition, there will be a 'safeguard clause' where by, in exceptional circumstances concerning risks to national
security, Member States can suspend or revoke general licences to certified companies.
The proposed directive takes full account of Member States need to protect their essential security interests as well as
to respect their commitments under international armaments control regimes. Indeed, companies will be responsible for
managing export limitations attached to transfer licences for defence related products sourced from another Member State
and will be prohibited from requesting export authorisations that infringe such restrictions. By reinforcing controls at
the common external frontiers of the Community, the proposed directive will also contribute to strengthening the fight
against illicit trafficking of defence related products.
Background:
An extensive consultation process has paved the way for this initiative. Besides an on-line consultation and the
commissioning of two preparatory studies[2] involving a series of interviews with relevant stakeholders, several
workshops with industry stakeholders and Member States representatives have been organised since July 2005.
Questions and Answers
Why has the Commission taken an initiative in the Community framework?
Constant case-law by the Eeuropean Court of Justice (ECJ) has made clear that Treaty (internal-market/first-pillar)
rules apply to defence-related products.
Though art.296 allows Member States to take restrictive measures pertaining to defence related products to protect their
"essential security interests", the ECJ has constantly stated that no general reserve existed under art.296. Recourse to
article 296 has to be demonstrated on a case-by-case basis and it is up to the Member States to provide evidence that
such recourse is necessary to protect their essential security interests.
Article 296 has thus no effect on the Community's legislative power to lay down measures concerning the approximation of
the national provisions which have as their object the establishment and functioning of the internal market (Article
95(1)). Of course, article 296 remains unaffected and the adoption of internal measures does not deprive MS from the
possibility to invoke art. 296 on a case-by-case basis.
Member States indeed currently implement export controls in a very heterogeneous and disproportionate way, which is
detrimental to the internal market of defence related products. The Commission therefore proposes a minimum
harmonisation of such export controls schemes as far as intraEU transfers are concerned.
What is the articulation with the work in the context of the Common foreign and security policy (CFSP)?
The Council adopted in 1998 a European Union Code of Conduct (CoC) on arms exports to strengthen cooperation between the
Member States and promote convergence with regard to exports of conventional weapons. The proposal is complementary to
the Code: it embeds the Common Military List annexed to the Code as its scope in order not to duplicate ammunition lists
of reference but refrains from harmonisation of export policies which clearly remains within the remits of the CoC.
What is the link with current ongoing EDA and intergovernmental endeavours?
In 2004, the Council created the European Defence Agency (EDA). Although deprived of any mandate for simplifying
transfers between Member States, the EDA has since constantly voiced the need to streamline current transfers'
procedures in order to ease industrial cooperation and to foster security of supply for governments procuring
cross-border[3].
The proposal also fully integrates the international cooperation of Member States in the area of export control. It
leaves a large margin of manoeuvre to Member States for deeper cooperation, for instance as regards the choice of
products for the different types of licences and the terms and conditions of such licences.
How precisely does the proposal simplify existing licensing systems?
A major contribution to simplification is the introduction in all Member States, where they do not exist, of general and
global licences. The general licence will allow all domestic companies, which comply with the conditions, to transfer
the covered defence related products without individual prior authorisation. Global licences will allow companies and
administrations to cover a large number of a company's products to a large number of recipients in one single
administrative act.
How does the proposal take into account the need to protect national security interests against the risks associated
with the transfer of defence related products?
The consultation process has revealed that the risks are generally not created by the transfer as such, but by the
subsequent exportation to third countries. The proposal therefore requires additional guarantees designed to increase
confidence between Member States in their mutual ability to properly deal with export to third countries following the
initial intra-community transfer:
According to common criteria, Member States will have to certify recipient companies' capacities to properly handle the
risks associated with the commerce in defence-related products. In problematic cases, a Member States may use a
safeguard clause to exclude certain companies from receiving defence related products under its general licence.
In addition, companies will have to report on the use of the licences, which thus enables regular public reporting and
ex-post control.
The proposal has a clear 'internal market' basis and does not affect Member States' export policies. The decision to
authorise or deny an export remains at the discretion of each Member State
***
[1] Cost linked to avoidance of transfer authorisations: inefficiencies of supply chains, unexploited economies of scale
etc.
[2] "Intra-Community Transfers of Defence Products", "Intra-Community Transfers of Defence Products- impact assessment"
http://ec.europa.eu/enterprise/regulation/inst_sp/defense_en.htm
[3] See notably the calls for simpler transfers in the three main EDA achievements : the Code of conduct on defence
procurement (since July 2006), the Framework Arrangement for Security of Supply in Circumstance of Operational Urgency
(Sept.06) and the Strategy for the European Defence and Technological Base (May 2007).
ENDS