INDEPENDENT NEWS

Innovative wood treatment gets building code approval

Published: Thu 27 Feb 2014 12:20 PM
Innovative wood treatment gets building code approval


Click for big version.
Large dimension plywood after the H1.2 decay test. The Azotek-treated sample is at the bottom and the untreated sample at the top
An engineered wood product that has the potential to transform building construction has been included in the New Zealand Building Code.
Laminated beams made from glued veneers of radiata pine are well known for their strength, stability and uniform sizing. Now improved durability can be added to the list.
Laminated veneer lumber (LVL) treated with Azotek, a novel product developed by New Plymouth-based Zelam Limited, has been included in the NZ Building Code as an acceptable solution for internal framing.
“This is a world-first,” says Zelam marketing manager Noel Coxhead. “It essentially makes wet solvent treatments for LVL and plywood obsolete and opens the door to much wider use of LVL framing in building construction.
“LVL is the key to precision construction using wood. But because of the well-known difficulties associated with wet solvent treatment of LVL, wood processors have been reluctant to go down that track.
“It is difficult to get traditional treatments to penetrate the glue layers that bond the layers of LVL and plywood. The liquids involved also affect the dimensional stability of the finished product – which needs to be dried after treatment.
“In contrast, our new treatment takes place during manufacture, so the finished timber is dry and ready for use as soon as it rolls off the production line. Because the treatment compounds are present from the surface to the core of the timber, it can be drilled, sawn and notched during building construction without any loss of integrity or need for retreatment.”
Azotek-treated LVL has been available on the NZ market for more than 12 months, enjoying a steadily growing market share from designers and builders seeking precision wood products. Its first commercial use was in Christchurch’s cardboard cathedral, where LVL beams were used for the main structural elements.
But despite having Standards approval as a treatment, the previous lack of formal Building Code approval has been a barrier to the wider use of Azotek-treated LVL, says Nelson Pine Industries (NPI) Australasian sales engineer Andrew van Houtte.
NPI has been producing Azotek-treated H1.2 LVL since 2012. Because it is a dry process, van Houtte says treated beams have precise tolerances, adding to the dimensional stability that LVL is known for.
“To my mind Azotek is the best treatment on the market. In a technical sense it is better than anything the industry has ever seen – exactly the right amount of chemical is applied and it penetrates throughout the product. It takes durability to a whole new level. It also has great environmental and health and safety credentials.”
He says most of the LVL produced by NPI is used in common structural applications, such as beams, rafters, joists, lintels and bearers.
Coxhead says Azotek is made up of two fungicides that are widely used on food crops, but are new to wood treatment – triadimefon and cyproconazole – plus bifenthrin, a standard wood treatment insecticide.
“Finding suitable fungicides was a long journey for Zelam. We had many set-backs. Not only did the active ingredients have to be fit-for-purpose, they had to be readily available and affordable,” he says.
“Azotek is the only combination that met all the essential criteria. Having two fungicides in the mix means it provides broad spectrum protection against rot and decay organisms, and a barrier against selection for resistance.”
Before Azotek was approved as an H1.2 treatment for LVL it was tested in rigorous trials by Scion and in-house by Zelam. These were designed to determine Azotek’s performance in conditions designed to simulate what happens when water leaks into a wall cavity.
Although Azotek-treated LVL has New Zealand and Australian Standards approval for H1.2 treatment, it is sold only in New Zealand, because the H1.2 standard does not apply in Australia. Trials of Azotek H2 and H3-treated LVL and plywood are now underway and Coxhead says these are looking very promising.
H2 treated framing is widely used in Australia, because this standard of treatment provides termite protection. When approvals come through for Azotek H2 and H3-treated LVL and plywood, these are likely to be well received by wood processors and builders on both sides of the Tasman.
“But the bigger prize is likely to be the United States, where a lot of engineered wood is used in housing construction. Already wood processors there are showing a lot of interest.”
ENDS

Next in Business, Science, and Tech

General Practices Begin Issuing Clause 14 Notices In Relation To The NZNO Primary Practice Pay Equity Claim
By: Genpro
Global Screen Industry Unites For Streaming Platform Regulation And Intellectual Property Protections
By: SPADA
View as: DESKTOP | MOBILE © Scoop Media