On Saturday [New Zealand Time] the Mars Polar Lander descent camera will capture Martian surface as never seen before.
And for the first time internet users will be able to listen to the sounds of the red planet.
The Mars Polar Lander was launched on January 3, 1999 and will land on December 3, 1999 [USA Date time].
Image Courtesy of NASA
The lander is presently cruising to Mars and is in good health. Currently, the flight team is continuing science
checkouts of instruments on the spacecraft and is busily preparing for surface operations. On November 30, the
spacecraft fired its thrusters for 12.6 seconds to fine-tune its path for arrival at the Martian south pole on December
3.
For just under two minutes a camera directed toward the south polar region of Mars will capture and store a series of
about 20 images unique in the annals of planetary exploration: the surface of a planet (other than the moon) as seen
from altitudes ranging from about 4 miles to only about 30 feet.
NASA has also installed microphones on the polar lander and expects to hear sounds from wind, tornadoes, and meteors
hitting the planet's upper atmostphere. The sounds will be broadcast live via realaudio links from the NASA website.
The camera, known as the Mars Descent Imager, or MARDI, will be positioned between the legs of the Mars Polar Lander,
with the exhaust of the hydrazine engines in view. It will begin clicking its shutter after the lander vehicle's heat
shield has been jettisoned -- about 6.5 kilometers (about 4 miles) above the surface -- and while the craft is still
swinging on its parachute harness. The last few images -- perhaps eight -- will be captured after the parachute has been
jettisoned at about the 1 kilometer (.62 mile) altitude and as the craft makes a controlled descent, slowed by retro
rockets, to the frigid northern edge of the Martian south pole's layered terrain.
"MARDI's images will make all of us much more comfortable in making interpretations of the lander's pictures because
they will give us a context," says Peter Thomas, a senior researcher with Cornell University's astronomy department.
"For the first time we will have a complete scale of pictures of Mars, from less than a millimeter all the way up to
orbiter pictures." The camera has a 70-degree field of view, and the estimated difference in resolution between the
first and the last black-and-white images will be a factor of about 800.
Thomas is one of three Cornell researchers on the MARDI team, led by Michael Malin, president of Malin Space Science
Systems, San Diego. Also participating in the development of the imaging system, and present at NASA's Jet Propulsion
Laboratory (JPL) in Pasadena, Calif., to interpret the images after they are received from the Mars Polar Lander, are
Cornell astronomy professors Joseph Veverka, who also is chair of the Cornell astronomy department, and Steven Squyres.
Also on the team are M.A. Caplinger of Malin Space Science and M.H. Carr of the U.S. Geological Survey in Flagstaff,
Ariz. MARDI was developed under a $3.5 million JPL contract.
At present, the highest-resolution images of the Martian surface, taken from orbit, are made up of pixels (or picture
elements) each covering 1 1/2 yards of terrain. That is about to change dramatically to images with each pixel covering
a fraction of an inch of the surface.
The descent camera pictures will be used to interpret ground features and will aid in the mission's main purpose,
studying the layers of ice and dust covering the polar region. These images will be captured with a "nesting" technique,
meaning that each successive image will be nested within the previous picture. As the spacecraft loses altitude, each
successive image will cover a smaller area within the previous larger image. The camera has no ability to aim, but
simply points where the spacecraft points. "The first image will be several kilometers on one side, but the camera has a
fairly wide angle so that even with the spacecraft swinging on a parachute, the images should remain nested within one
another," says Thomas.
The nesting technique, he notes, will enable researchers to find a ground feature, such as a boulder, in the image taken
closest to the ground, then work back to the largest picture. The spacecraft's electronic memory retains each image,
plus details of when the image was taken, which direction the spacecraft was pointing at the time and its altitude. In
this way, says Thomas, "you can take pictures and reconstruct them from that geometry."
The number of images returned to JPL will be limited by the storage capacity of the spacecraft's memory. For this
reason, the on-board computer has been programmed both to reject some images taken by the camera and to write over
others. The computer will be instructing the camera to capture images in different image formats (in terms of pixels)
based both on altitude and the number of images already taken. If the computer determines that the altitude has not
changed sufficiently, it will not save the image.
"If the memory's storage is full and the camera is still taking images, the computer is programmed to throw out some
lower-resolution pictures," says Thomas. "We want to maintain nesting and protect the higher resolution images as we get
really close to the surface. Those images closer to the surface are of platinum value."
The "overwhelming purpose" of the descent camera's images, says Thomas, is to tie what will be seen with the lander's
camera on the surface of Mars with images taken a few feet from the surface. "We've seen the whole of Mars in 100-meter
resolution, but only 1 percent of the surface in three-meter resolution. These images will be filling the gap."